# Copy Trading on Solana with TradeWiz + dEdge

Source: https://dedge.pro/copy-trading-on-solana-with-dedge-tradewiz/

[ACADEMY](https://dedge.pro/dedge/academy/) / COPY TRADING

dEdge Academy · 7 min read · Published 2025-10-14

This guide preserves the original educational material. Screenshots and third-party interfaces may have changed. dEdge provides research; third-party tools execute trades. For current dEdge limits and subscriptions, see [current plans](https://app.dedge.pro/pricing).

![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/ce6cbdda3d5409a7.png)

**Why this combo?**

Use **dEdge** to _find and vet profitable wallets_ (Wallet Finder / Curated / Filtered). Then let **TradeWiz** copy their trades for you with fine-grained limits, risk guards, and timing windows. TradeWiz runs on Telegram and supports major Solana venues.

 

## ✅ Prerequisites

1.  **Telegram account** and the **[TradeWiz bot](https://t.me/TradeWiz_Solbot?start=r-26BH26XA23)**
2.  **Fund your TW wallet** : when you open TradeWiz, it creates a Solana address—send **at least 0.1 SOL** to start trading.
3.  **A target wallet from dEdge** : pick one via **Wallet Finder** or **Curated Wallets** , confirm consistency in **Analyze Wallet** (Win Rate, PnL Ratio, Delta), and save to your tracker for monitoring.

## 🛠️ Step-by-Step: Create a Copy Trade in TradeWiz

### 1) Open the Copy Trading module

![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/2e48d3bc43252929.png)

-   In the bot menu, tap **Copy Trading → Add** .
-   Paste the **target wallet** (from dEdge) and **give it a label** (Tag).
-   Tap **Create** to activate the task.

![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/4ab99d006c0f60d5.png)

### 2) Core sizing & spend controls

### ![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/142bb37106c9d776.png)

-   **Buy Percentage:** sets your buy size as a % of the trader’s purchase.
-   **Max / Min Buy** : caps or floors your per-trade SOL spend (applies **after** the percentage calc).
-   **SOL Spending Limit** : total budget the bot can spend copying this address; sells credit back the limit.
-   **Buy Limit per Token (1/2/3)** : copy a token at most N times; optional **reset after sell** .
-   **No Duplicate Buys from Target Wallet** : ignore subsequent DCAs (dollar cost averaging) by the trader.

### 3) Safety filters (token & venue)

![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/cfbb0eb195d28f42.png)

-   **Unrenounced / Unburned** : choose whether to copy trades from pools with these flags. We recommend you keep it as Yes.
-   **Max / Min SOL for Target Wallet** : Only copy the trades made by the target wallet **if** the amount of SOL they used fits inside your chosen range. (_Max / Min SOL for Target Wallet_ acts as a **gatekeeper** — ensuring you only copy trades from your target wallet that fall within the risk and trade-size window that fits your strategy.)
-   **Platforms** : select which pools/DEXs to allow (Pump.fun, Raydium, Meteora, Jupiter, etc.). We recommend keeping all, unless you know what you’re doing.
-   **Min LP** , **Max and Min MC (Market-Cap) and** **Token Age** : you can block illiquid, microcaps, or very fresh launches.

### 4) Exits & behavior

![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/9001543da2e271a0.png)

-   **Copy Sell** : mirror their sells. Recommended if you’re getting started.
-   **Sell Proportionally** : sell the same **% of holdings** they sell (vs. amount-based).
-   **First Sell Copy %** : on the first sell event, exit a set % of your position.
-   **Copy Trade Auto Sell (TP/SL / Trailing Stop)** : add your own risk exits on top of copying.
-   The **Retry** feature tells TradeWiz how many times to **re-attempt a failed transaction** if the first try doesn’t go through (due to slippage, network congestion, or RPC issues).

> 💡 **Recommended:** Set **1–3 retries** — especially for _sell orders_.

![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/cb4629e7bb4fb7b1.png)

#### **Buy / Sell Priority Fee**

This is an **extra network fee** paid directly to validators to **prioritize your transaction** in the Solana block.

Think of it as a _fast-lane ticket_: the higher your priority fee, the faster your trade will be processed — especially useful during heavy network activity.

-   **Buy Priority Fee** : helps ensure your entry goes through quickly before price moves up.
-   **Sell Priority Fee** : can improve the chance of timely confirmation, but does not guarantee execution in congested blocks (critical for volatile pumps).

💡 **Recommended range:** `0.001–0.003 SOL`

-   Go higher during meme coin launches or airdrop hype.
-   Keep it moderate on slower, low-volume tokens.

#### **Buy / Sell Tip**

The “Tip” works like a **bribe** or _extra incentive_ for Solana validators to pick your transaction first.

It’s separate from the base Priority Fee and can drastically reduce latency when the network is busy.

-   **Buy Tip 🚀** : increases the chance your buy executes at the intended price (useful when tokens are moving fast).
-   **Sell Tip 🚀** : ensures your sells are confirmed instantly when everyone else is rushing to exit.

💡 **Recommended range:** `0.001–0.003 SOL`

Combining a Priority Fee + Tip of ~`0.002` each strikes a good balance between speed and cost.

 

#### 🔹 **Anti-MEV (Buy / Sell)**

MEV stands for **Miner Extractable Value** — in Solana’s case, **searchers** or **validators** can try to front-run or sandwich your transaction (executing before you at a slightly better price).

**Anti-MEV** routes your transactions through **private validators** or uses **stealth execution** methods that hide your trade from public mempools at the cost of being a bit slower than normal transactions.

-   🟠 **Anti-MEV Buy** → Prevents front-runners from pushing the price up before your buy.
-   🟠 **Anti-MEV Sell** → Stops bots from dumping just before your sell executes.

💡 **When to enable:**

-   On volatile launches.
-   When you use high slippage (>15%), which increases MEV risk.
-   Keep it off for large, stable tokens — it adds safety but slightly delays confirmation.

### 5) Execution settings (crucial)

![Illustration from Copy Trading on Solana with TradeWiz + dEdge](https://dedge.pro/images/academy/5ad7b26a895e0d9c.png)

-   **Slippage** (general): based on the **copied wallet’s buy price** ; if price moves beyond your range, the trade won’t fill (you’ll see a slippage failure).

#### 🟢 **Buy Slippage — Keep It Tight (≈ 10 – 15 %)**

For **buys** , you want precision.

A smaller slippage range keeps your entry price close to the trader’s original price and avoids chasing spikes.

If your buy slippage is too high, you might enter **late and more expensive** , turning a good setup into a bad entry.

 

💡 Recommended: **10 – 15 % max** for buys.

This gives enough room for network delay but prevents overpaying when prices move fast.

#### 🔴 **Sell Slippage — Allow More Room (≈ 20 – 50 %)**

For **sells** , the priority is not getting the perfect price — it’s **getting out** .

When the wallet you’re copying sells, prices can drop instantly.

If your slippage is too tight, your sell may fail, leaving you holding a rapidly-dumping token.

A higher slippage ensures your exit executes even in high-volatility moments, protecting you from heavy drawdowns.

> 💡 Recommended: **20 – 50 %** for sells.

> This gives TradeWiz enough flexibility to close your position alongside the copied wallet — even if the market tanks.

-   **Pumpfun Slippage Logic** : your **token amount is fixed** , so **SOL spent can rise** as price ticks up; e.g., 50% slippage → pay up to 1.5x the base price. Set a value you’re comfortable with.
-   **Auto Retry** : set retries to instantly re-attempt failed copies—boosts success rate during volatile moves.
-   **Active Time Window** : choose **Start / End Time** for when the task is allowed to copy (great to avoid sleeping-hour entries).

> **Speed note:** TradeWiz emphasizes very fast copy execution and block-level matching when fees are adequate. If speed lags, check gas settings, congestion, or slippage failures.

## Recommended Starter Presets

Use these as **templates** and tune to taste.

**Beginner / Safer Copy**

-   Buy %: **50%** · Max Buy: **0.1 SOL** · Min Buy: **0.005 SOL**
-   Copy Sell: **ON** · Sell Proportionally: **ON**
-   Slippage Buy: **10%**
-   Slippage Sell: 5 **0%,** Auto Retry: **2–3**
-   Min LP: **20 SOL** · MCap: **≥100k** · Token Age (Pump): **≥30 min**

**Aggressive**

-   Buy %: **100%** · Max Buy: **0.5 SOL**
-   Copy Sell: **ON** · Sell Proportionally: **ON**
-   Slippage Buy: **15%**
-   Slippage Sell: 5 **0%**
-   Auto Retry: **2–3** · Min LP: **5–10 SOL**
-   Token Age: **no min** (embrace new launches)

**Swing / Slower Pace**

-   Buy %: **50%** · Max Buy: **0.25 SOL**
-   Copy Sell: **ON** · Sell Proportionally: **ON**
-   Slippage: **8–12%** · Auto Retry: **1–2**
-   Slippage Sell: 5 **0%**
-   Min LP: **30 SOL** · MCap: **200k–3M** · Token Age: **≥6–24h**

(Names of fields can vary slightly as the UI evolves, but the logic above maps to TradeWiz options.)

 

## 🧰 Troubleshooting (fast fixes)

-   **“Trade wasn’t copied.”**

Check: slippage too low, liquidity unavailable during Pump→Ray transitions, node push failure (rare), or your platform filters blocked the venue.

-   **“Why did spend exceed my single-trade cap?”**

That’s Pump.fun slippage behavior—token amount fixed, SOL spend flexes with price. Set the **Pump Slippage %** to define the **extra SOL** you’re willing to spend.

-   **“It’s slow.”**

Raise gas/Priority fee, enable Auto Retry, or try off-peak hours; congestion and low fee settings are common causes.

-   **“Worried about MEV.”**

Keep slippage reasonable; TradeWiz documents MEV risk when slippage is very high and recommends protection toggles where available.

 

## Operational Loop with dEdge

1.  **Find** candidates in **dEdge** (Wallet Finder / Curated / Filtered).
2.  **Analyze** : check Win Rate, PnL Ratio, Net SOL, and **Delta percentiles** ; inspect **Last Trades** and open the **DEXScreener** links to see buy/sell markers.
3.  **Copy** : configure a TradeWiz copy task with the presets above.
4.  **Track** : add the wallet to your **dEdge Tracker** for daily recaps and pause/scale based on data.

This keeps you disciplined, data-driven, and fast.

Ready to try the workflow end-to-end?

Start by **finding a consistent wallet on dEdge** , then mirror it with TradeWiz:

 

👉 **Open dEdge on Telegram** → [https://t.me/dEdge\_solana\_bot?start=academy](https://t.me/dEdge_solana_bot?start=academy)

👉 **TradeWiz on Telegram** → [https://t.me/TradeWiz\_Solbot?start=r-26BH26XA23](https://t.me/TradeWiz_Solbot?start=r-26BH26XA23)?

 

📖 **GitBook (copy trading docs)** → key features & options explained. ([TradeWiz](https://tradewiz.gitbook.io/tradewiz/copy-trading))

 

### Put the context to work.

Start with a free public wallet report. Look at the analysis window, the returns and the details.

[Research a wallet ↗](https://app.dedge.pro/)

## Keep learning.

[All guides ↗](https://dedge.pro/dedge/academy/)

Copy trading · 4 min

### Copy Trading on Solana with dEdge + Trojan

Read guide ↗

[View page](https://dedge.pro/copy-trading-on-solana-with-dedge-dbot/)

Copy trading · 6 min

### Copy Trading on Solana with dEdge + dBot

Read guide ↗

[View page](https://dedge.pro/ia-insights-how-dedge-is-changing-the-analysis-game-2/)

Copy trading · 3 min

### Copy Trading in Crypto: Your Shortcut Through the Noise

Read guide ↗

[View page](https://dedge.pro/copy-trading-in-crypto-your-shortcut-through-the-noise/)

---

[Agent content index](https://dedge.pro/llms.txt)